Pусский
Français
العربية
中文
Altogether78, Every page shows：18article
Name: Round Three-Way Ridge CapWeight: 5.6 kg per pieceApplication: Used at the intersection of three ridges, one piece per intersection
Send Inquiry
Name: Sharp Ridge End CapSpecification: 390 × 240 × 110Effective Length: 380Weight: 6.0 kg per pieceApplication: Installed at both ends of the horizontal ridge
Send Inquiry
Name: Sharp Eave End ClosureSpecification: 390 × 190 × 110 390 × 150 × 90Effective Length: 360 mmWeight: 3.5 kg per pieceApplication:One piece installed at the bottom of each eave side
Send Inquiry
Preservative Wood Battens are pressure-impregnated, decay-resistant wooden strips used as the supporting base layer in sloped roof systems. They form a stable grid framework to secure roof tiles, solar tiles, and related mounting components.
Send Inquiry
Chemical anchor bolts are high-strength fasteners used to securely fix components to concrete, masonry, or other solid base materials. Unlike mechanical expansion anchors, they rely on chemical adhesives to bond the bolt with the base material, providing reliable anchoring force even under strong tension, shear, and vibration.Role in Solar Tile RoofingIn solar tile installation, chemical anchor bolts are mainly used to:- Fix the mounting brackets, support rails, and racking systems of sola...
Send Inquiry
Steel Nails & Self-Tapping Screws1. Steel NailsSteel nails are common fasteners made of high-strength carbon steel, used for fixing wooden battens, roof shingles, and auxiliary structures on the roof.Role in Solar Tile Installation •Fix preservative wood battens, counter battens, and roof sheathing firmly to the roof structure. •Secure lightweight accessories and auxiliary supports for the solar tile system. •Provide temporary or permanent fixing during roof construction.Key Perform...
Send Inquiry
Conical (Sharp) Ridge Tile ClipProduct Introduction:Installing ridge tile clips enables safe and fast fixation of conical ridge tiles, enhancing both the aesthetic appearance and the stability of the ridge tiles.Installation Method: Use corrosion-resistant wood screws or round nails with a diameter of Φ5 mm, with an embedding depth of no less than 15 mm.ItemDetailsProduct CodeWFG2a (Conical), WFG2b (Sharp)MaterialBaked-finish AluminumColorRed, GrayApplicationConcrete Ridge Tiles
Send Inquiry
This product is installed on the tile roof. It adopts a non-destructive installation method for the lightning protection strip, effectively avoiding damage to the finished product and waterproofing hazards caused by secondary construction.
Send Inquiry
Cut Tile Clip®Product Introduction:The cut tile clip assists in the installation of cut tiles (截瓦) at hip rafters or gutters, significantly reducing the time required for laying cut tiles while ensuring safety and an aesthetically pleasing finish. It is compatible with a wide range of tile profiles.Material: High-quality stainless steel spring materialInstallation Method: A minimum of 1 clip is required per cut tile ItemSpecificationProduct CodeWFG1LengthApprox. 3.3 cmWidthA...
Send Inquiry
Wind Resistance Tile ClipProduct IntroductionThis product assists in securing roof tiles and enhances the overall wind resistance of the roof. Based on the local wind force and roof slope conditions, one clip is typically installed for every 3, 2, or 1 main tiles. It is suitable for all concrete tiles without the need for steel nails.Note: The size of the tile batten should be no less than 30×30mm. For the Wayan (瓦砚) series tile battens, a size of 30×35mm is recommended.Installation MethodHook...
Send Inquiry
Timber Support BracketProduct DescriptionEasy to install and material-saving, this bracket is an essential component for dry-hung ventilated roof systems. It is compatible with ventilation membranes or straight/hip ridge ventilation grilles, suitable for roofs of all slopes, and its height can be adjusted freely.ItemSpecificationProduct CodeWFG4MaterialHigh-quality double-sided galvanized steel sheetInstallation Spacing500~700mm per piece
Send Inquiry
Ridge Tile RollItemSpecificationProduct CodeWFP1Material IntroductionBreathable polypropylene material, with aluminum stretch hems on both sides, and the self-adhesive material is high-performance butyl rubberMaterial Width260mmMaterial Specification10m/rollAvailable ColorsReddish-brown, Dark gray
Send Inquiry
WFP2 Ridge Ventilation Roll (Product Specification)ItemSpecificationProduct CodeWFP2Material IntroductionThe core layer is breathable polypropylene material, with aluminum stretch hems on both sides. The self-adhesive layer is made of high-performance butyl rubber, ensuring long-lasting and firm adhesion.Material Width280mmMaterial Specification10m/rollAvailable ColorsReddish-brown, Dark gray
Send Inquiry
Eave Vent StripItemSpecificationProduct CodeWFP4a, WFP4bMaterial IntroductionHigh-quality PVC or metal materialMaterial Length30m/roll or 1m/pieceMaterial Width110mmAvailable ColorBlack
Send Inquiry
Eave Guard GratingItemSpecificationProduct CodeWFP3Material IntroductionHigh-quality PP materialMaterial Length1m/pieceMaterial Height75mmAvailable ColorBlack
Send Inquiry
Flexible FlashingItemSpecificationProduct CodeWFP5Material IntroductionPE-coated aluminum foil + PET film, with butyl rubber adhesive layerMaterial Length10m/rollMaterial Width280mmElongationApprox. 30%Available ColorsReddish-brown, Dark gray
Send Inquiry
Lightweight Flexible FlashingItemSpecificationProduct CodeWFP7Material IntroductionCore-reinforced aluminum mesh with butyl rubber adhesive layerMaterial Length10m/rollMaterial Width280mmAvailable ColorsReddish-brown, Dark gray
Send Inquiry
Flashing BattenItemSpecificationProduct CodeWFP6Material IntroductionHigh-quality aluminum with double-sided coatingMaterial Length1m/pieceMaterial Width90mmAvailable ColorsReddish-brown, Black
Send InquiryCall us:+86-18632003436
+86-18630061517
Email: info@yinengde.com
whatsapp: +86-18630061517
Copyright @ 2026 Wade New Materials. All rights reserved
This website uses cookies to ensure you get the best experience on our website.
WhatsApp
Phone